![]() Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again. Then press EEPROM button and the printer will print some text.ĥ. Then press " EEPROM Clear" button to clear EEPROM.Ĥ. After you download the resetter, extract it and double click "servicetool.exe"Ģ. Load some papers in your printer and press the " Main" Button once, wait until the printing is done.ģ. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.ġ. Then Press STOP/RESET button twice then let BOTH buttons go.ĥ. Keep holding down Power button and let STOP/RESET button go.Ĥ. Hold down STOP/RESET button and press Power button.ģ. Turn off the printer without pulling the power cords.Ģ. You have to enter in service mode in order to used the resetter. And download the resetter at the bottom of this post. To do this, follow this steps.įirst make sure that the power cable and usb cable are connected, before you perform the reset procedure. In order to solve this you need to clear or reset the counter protection of your printer. If your printer show P 07 error it means that your ink absorber inside the printer is almost full. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |